Air Compressor Regulator Repair

Our air compressor came with a regulator. My dad was using it with a nail gun to fix the fence when he noticed that the regulator wasn't working. The pressure gauge did work, but the regulator kept sticking and leaking and wouldn't stay at the correct pressure. My dad turned it up to add more pressure, and then turned it off until it ran out of air. I told him he should stop using it because it isn't safe, but he wanted to finish the fence to keep out people and dogs and coyotes. 

After making sure that the tank was completely de-pressurized and safely unplugged, I removed the regulator. I took apart the regulator to see if I could figure out why it was sticking. I noticed that there was rust on the pin. I used a dremel-type bit in my drill press to polish away the rust off the tip of the pin. Now the regulator works without sticking and leaking.

Pink Elephant Spray Bottle

 I like to use a simple mix of water and dish soap to clean around the house. It's cheap and less toxic and scented than some other cleaners. The only problem is I need to buy my own spray bottle for it. I always make sure to label the bottle because I learned in Chemistry class that's a good safety practice. I've bought several spray bottles from the dollar store, but they are a bad design and poor quality. Today, I bought a new spray bottle at the Habitat for Humanity Re-Store. I had a choice of a standard bottle with lines on the side, or a fun pink elephant shaped bottle. I chose the pink elephant. It was missing an eye sticker, so I hot glued a googly eye on to fix it.

Foam Sculpture Toy- from the archives

One year, Griffin got an activity kit for Christmas with foam pieces that you can stick together with water to make sculptures. He had fun with it, but had to be careful not to add too much water. The pieces would dissolve into messy goo when soaked in water.

Griffin figured out that these cheetoh-like foam nuggets are similar to biodegradable foam packing peanuts, with colors added. Some foam packing peanuts are made of cornstarch or other materials that dissolve in water, so they won't take up so much space in landfills or cause problems if they blow away outside. He recently found a company selling fun shapes of packing peanuts- and advertising that they are fun for crafts too! So next time you get a package with biodegradable foam pellets, you can try building a sculpture with them.

Amazon Affiliate link to a product like this sold as a toy: https://amzn.to/3mivcvx

Amazon Affiliate link to fun shaped packing pellets: https://amzn.to/30OjJw9

Homemade Beef Jerky

We bought a new air fryer/toaster/dehydrator combination machine. I decided to try making my own beef jerky. I frequently buy jerky from Buc-ees, but it's a long drive from home. I wanted to find out how difficult it is to make, and how the cost compares. 

First, I bought eye of round for $6.79/lb. The recipes I looked up said to use lean beef. I bought almost a pound of meat that was already sliced thin. Next, I marinated it overnight in a mixture of soy sauce, Worcester sauce, pineapple juice, fresh garlic, and other spices. 

After the meat marinated overnight in the fridge, I took it out and drained it. (I saved 1/4 of the meat and the marinade for another project.) Even though the meat was already sliced thin, I pounded it flatter between two pieces of plastic wrap to make sure it was evenly thin.

Then I sliced the meat into 1-inch strips and arranged it on the mesh tray. It wouldn't all fit so I used the wire rack too. Then I used the dehydrator function at the highest setting, 175F (79C). I set it for 5 hours, but it only took 4 and a half hours. I left the house for a couple of hours, which stopped me from eating all the jerky before it was ready.

When the jerky was done, it had shrunk from 12 oz (not including the marinade) to just over 4 oz. So in total, not counting the small cost of the marinade or electricity, I spent $5. The same weight of jerky at Buc-ees would have cost $9. Plus my jerky was drier, making the price difference more significant.

The leftover marinade and 1/4 of the meat that I saved was perfect as part of a stir fry for lunch. The meat was sliced into very thin short pieces and cooked with about 2 cups of bell peppers, onions, mushrooms, and the remaining marinade.

Ingredients- eye of round, fresh garlic, soy sauce, onion powder, Worcester sauce, pineapple juice, homemade tabasco salt, smoked paprika, black pepper.

Amazon Affiliate link for the oven: https://amzn.to/3q7L05b

Tape Dispenser

 

I built a new tape dispenser for my desk. I used pallet wood for the base, oak flooring for the arm, a metal rod from a printer, and an old hacksaw blade. 

Can you use a saw blade to cut a saw blade? I didn't have to find out because I used an angle grinder to cut the rod and hacksaw blade. 

This tape dispenser is large enough that it would probably work with a large roll of duct tape, packing tape, or foam tape.

Capacitor Replacement

The arcade I work at has laser tag. The players wear vests with sensors. The laser tag vests plug in and hang up on chargers whenever they're not in use. However, the power supply wires are a little bit too big for the terminals, which causes the wires to come undone sometimes. While I was away, my boss tried to repair one of them but he reversed the copper and silver leads. This caused a tantalum capacitor to fail violently. 

I took off the plastic cover to see the board, and found a burned capacitor. I took it home and found a replacement aluminum electrolytic capacitor with the same value and sufficient voltage. 

My drawer of capacitors

I have my drawer of capacitors organized in a way that works for me, but might look messy on first glance. The handwritten number on each label is the voltage. The top number is the measured value of the capacitor, and the 2nd one is what it should be (nominal), and the 3rd number is the ratio. 

I desoldered the old capacitor and put the new one on. It was larger than the old one, but there was plenty of space under the cover. I forgot to clean off the flux residue, or cross off the sticker that said "lead-free".

I took the charger back and it worked perfectly.

From the Archives- Umbrella Recycled into Haircut Cape

Many years ago, I had an old umbrella with cartoon characters on it but it was broken. I pulled the fabric off the frame and saved it to recycle. It ended up with a hole in the middle, so I couldn't turn it into an umbrella hat, but I still tried sticking my head through it. 

That gave me the idea to turn it into a haircut cape. I had my mom sew knit fabric around the hole. Adding some elastic or velcro could make it fit better, but I never bothered.

When I was little and used to get haircuts at home, this cape helped keep the cut hairs from getting on my shirt. And because it was made from an umbrella- it was completely washable.

VR Accessory Repair- Woojer

 

The Woojer Strap Edge is a wearable accessory that's similar to a speaker. It gives VR games an extra-realistic experience by adding haptics. So if there are special effect noises in the game, you feel them as vibrations. 

I really like using the Woojer, so I was very disappointed when the switch on mine recently broke. The light would come on when I plugged it in, but nothing happened when I pressed the button. No clicking, no "switch feel". So I guessed correctly that the switch had gotten pushed away from the plastic button.

I wrote to the company to see if it might be covered under warranty, but I was too impatient to wait for a solution from them. Plus I really wanted to see how it worked. I decided to open it up and fix it myself. This was a difficult decision. My parents advised me not to do it, because there was a risk of either not being able to repair it, or a chance that it could break worse in the future. But I felt confident that it I knew what the problem was. Luckily, the electrical connections were all intact.

Looking inside the Woojer, I could tell that either the PCB pads lifted off or the solder on the support tabs of the switch broke. I tilted the switch back in place and then added hot glue between the switch and the oscillator can. That way the switch has support behind it keeping it in place even if the plastic button is pressed too hard or at an angle.

I found out that the rechargeable battery inside is a 12 watt hour 18650, so it would be relatively easy to replace if it wears out.

I put back the 5 screws that hold in the PCB, and the 4 screws that hold the case together. Now my Woojer is working again so I can use it when I play VR games like Beat Saber.

Update: After I got a response to my email to Woojer, I let them know I had already fixed it myself, and gave them a suggestion of how they could make their product better. Here's their reply:

Hi Griffin,

​

Quite impressive! I am glad you were able to resolve the problem and I will be sure to pass this on to our engineers.

Please let me know if there is anything else I can do for you.

Sincerely,

[Customer Support Representative]

Dragonfruit Lemonade

I like the fruit-flavored Refreshers at Starbucks. But they are expensive, contain caffeine, and the store has limited hours. So I decided to try to making my own. My version doesn't have green coffee juice, so no caffeine. I wanted to buy chunks of freeze-dried dragon fruit, but it was cheaper to buy powdered. This does make it easier to mix. I also got True Lemon crystallized lemon because I can't store any fresh fruits. I mix these with sugar, add some water, and then I stir it with my IKEA Produkt electric milk frother. Next I add ice and more water, and stir it again. Then if I serve it in a rinsed Starbucks cold cup, it looks almost like the real thing.

Here are some Amazon affiliate links to the products I used:

True Lemon https://amzn.to/3CYecRp

Dragon Fruit (Pitaya) https://amzn.to/2Yrw48k

Sugar (may be cheaper to buy locally) https://amzn.to/3mUhGP6

 

Battery Testing Jig

 I like to test the batteries I have collected to see whether they still have any life left in them before sending them to be recycled. This can be a tedious process, so I wanted to make part of the process easier.

This battery testing jig uses a foot pedal (doorbell button) to activate a solenoid (powered by 4 AA batteries). This pulls the battery into place between the solenoid and a screw at the other end. This connects the battery to my multimeter, without having to hold a lead in each hand while simultaneously trying to look at the multimeter. I can then sort the batteries according to the results.

Testing Jig

Foot Pedal