Monday, June 3, 2024

Vanilla Pudding Brulee

 


Ever since I got my propane torch, I have wanted to make creme brulee. I've never had creme brulee and I don't know how to make the complicated recipe with eggs and other ingredients. So I decided to make vanilla pudding brulee instead. I started with a store brand boxed pudding mix and added milk, cream, and a dash of cinnamon. After mixing, I spooned the pudding into about 6 individual metal containers and stored them in the refrigerator. When I was ready to serve the pudding, I sprinkled sugar on top and melted it with my torch. 

Automatic Foaming Soap Dispenser With Dilution System




My automatic soap dispenser has been through several versions. There was the regular automatic dispenser, the rainbow soap version, and now the foaming soap dispenser.

Unfortunately, keeping a bottle of diluted soap for the foaming dispenser was not a good idea. The watery mix, even with soap, ended up growing moldy. So I decided to keep the full concentration of soap in the bottle, and dilute it on demand instead. To do this, I used the pump from the rainbow version, with one channel pumping soap and the other five channels pumping water. 



It uses the same technique as my tea robot, with electrodes to control the mixing pump. The mixing pump only runs when the dispensing pump runs, so there's no chance of overflowing.

Here is the block diagram:



Sunday, May 26, 2024

Knife Repair - handle replacement

Knife with replacement handle 

The handle of this knife broke while cutting cheese. It had a very short tang, and the plastic of the handle was getting old. It's a basic dull cheap steak knife, but it's one of my mom's favorites. So she asked me to replace the broken handle. I decided to use two sections of salvaged flat steel. First I sanded off the black paint, and then measured and cut the pieces to the same length as the old handle. I clamped the two pieces around the tang of the knife blade, and then welded it together. Next, it could use some sanding to be more comfortable to hold.

The old, broken handle.


 

Monday, May 13, 2024

Laundry Detergent Hack

Have you ever tried to get the last drop of laundry detergent out of the bottle? Leaving the bottle upside down gets quite a bit out, but there's still more trapped. The design of P&G/Tide/Gain bottles makes it difficult to get more out. I could rinse out the rest with a lot of water, but that's actually too much soap for one load. Another way to get the last drop and rinse more effectively is to pry off the cap insert with pliers.

Living in a dorm with shared laundry rooms, I saw how this inefficiency is multiplied. So many students throw away the bottles without trying to get all the soap out. They could be too busy to worry about it, or maybe they just don't know because they don't have much experience doing laundry. Imagine a dozen bottles of soap thrown away, each with over 4 ounces of soap left in it. That's also a dozen bottles thrown away- not clean enough to be recycled even if they had been put in a recycle bin.  

My engineering solution is to drill a hole in the corner of the bottle and let it drain into another bottle. Then the empty bottle can be rinsed to use every bit of soap, and then it will be clean enough to recycle. I was shocked that over one semester, I collected enough leftover soap to fill a whole bottle! 




Saturday, March 30, 2024

Refillable Marker

 I accidentally broke my favorite marker when it got caught in the desk drawer. But I found a replacement that's even better. I found out that refillable markers exist and aren't that expensive. This type of marker is typically used as a paint pen for art. I filled mine with diluted inkjet printer ink. It has a reversible tip (either rounded or straight). It has a valve that opens by pressing on the tip, just like paint pens. There's also a tiny ball for mixing paint by shaking. I decided not to use the mixing ball because my ink is thin and uniform. 


After testing the first new marker, I filled a bunch more. I did add a mixing ball to the orange ink because it seems to separate more than the other colors. The black ink isn't printer ink, it's from the broken marker.







Monday, March 11, 2024

Lemon Watermelon Rind Pickles



Last summer, we grew a watermelon in the garden. We were so worried that the raccoons would get it that I made a welded cage to protect it. We kept checking to see if it was time to pick. The leaves on the plant turned yellow, so we thought it was ready. 


We cut the watermelon open- and it wasn't ripe. It didn't taste bad, just kind of bland and less sweet than a good watermelon. The seeds looked mature, so it must have been very close. But after you open a watermelon it's too late. 

The watermelon had a larger white layer near the rind (not the tougher greenish part). It tasted crisp and very similar to cucumber. That gave us the idea of making pickles. We decided to keep it simple and make quick refrigerator lemon pickled watermelon rind. We added just lemon juice, sugar, and salt, and didn't cook it. I don't have an exact recipe, but I read a few online. Enough lemon juice and sugar to make a syrupy solution to cover the chopped watermelon, and a pinch of salt but not enough to affect the flavor. If you add too much sugar, it would be more like candied watermelon rind. It wasn't pickled enough to keep very long in the fridge. Regular pickles with vinegar might last longer. 

Railroad Sightseeing

 I recently took some trips on Amtrak, with plenty of time for sightseeing. It was a great opportunity to try to spot some of the things I've seen in Youtube videos about trains. I learned about "Fallen Flag" logos that are from train companies that no longer exist or were changed after mergers.

Amtrak engine with Kansas City Southern Fallen Flag in the background.
The Dynamic Tamping Express could only be seen from the train. 

Maintenance of way equipment on a flatcar.

"DO NOT HUMP"



Flange lubricator
Canadian Pacific (Fallen flag)
Old BNSF logo.



I was moving too fast to take a good photo, but if you know the logo it is recognizable.


Blue tanker.


I took some photos of the train museum at the Amtrak station in Temple.




Steam locomotive not a real panoramic photo, just two photos stuck together)



Thursday, December 28, 2023

Propane Torch Stand


 I don't have a good place to store my propane torch. I want it to be outside near the grill but safe from rain. Taking it off and reattaching it every time I use it wastes some fuel. So I decided to build a stand for it that clamps onto the propane tank and includes a cover to protect it from the rain.
The stand is made of 1/2 inch square tube, and the joints are MIG welded. The cover is a steel can, screwed on so that it can be replaced if it rusts.



Friday, December 15, 2023

Quest 3 Controller Straps

I recently upgraded from the Quest 2 to Quest 3 VR headset. The controllers have wrist straps to prevent the player from flinging them across the room by accident. With the Quest 2 (and Rift CV1) I made custom wrist straps from tshirt yarn. This makes the wrist straps more comfortable and washable. I planned to do the same thing with the Quest 3, but the connection is more complicated.




The wrist strap on the Quest 3 is attached with a plastic L-bracket that slides in inside the battery cover. My plan was to make an adapter to use my custom wrist straps. I decided to re-create the L-bracket out of metal and then find a way to attach a loop of tshirt yarn to it. First, I tried using a strip of steel bar stock. It's too hard to easily drill a hole in it. I tried annealing it by heating it with a propane torch and then letting it cool slowly. Even after that it was still difficult to drill and I would have had to grind it down a lot to get it into the correct shape.  



I decided to try using a nail instead. I tested how to grind the head of the nail down to match the shape of the L-bracket. Then I attempted to heat the nail and bend it into a loop. The short nail I tried first didn't make a large enough loop, so I switched to a ring-shank fencing nail. It's almost thin and soft enough to bend without heating. My mom tried doing that, but the loop was too large. 

I used the propane torch to heat up two ring-shank nails and then I bent them into the right size loop with pliers. This time I ground the nail heads into the right shape after forming the loops. That turned out to be perfect.     







Thursday, November 23, 2023

Eggnog Extract

 


Eggnog extract- I added 1tsp nutmeg and 1 tbsp cinnamon to a jar of Everclear. I used the 95% concentrated alcohol as a solvent. Disclaimer- Everclear is very strong and should be diluted in the final drink. It's even illegal in many places (California, Hawaii, Florida, Iowa, Maine, Massachusetts, Michigan, Minnesota, Nevada, New Hampshire, New York, North Carolina, Ohio, and Washington) 

After the extract sat for a few hours, I added 2 tsp vanilla extract. The flavor is good when mixed with milk and simple syrup, but could be improved with a hint of caramel. 

2026 Update: I have made several batches of this extract and switched to using other spirits, mostly bourbon